Ubee DDW2600 User Manual page 10

6
Power cycle the wireless cable modem by removing the power adapter from the
electrical outlet and plugging it back in. Wait several minutes for the wireless
cable modem to re-establish communications with your cable service provider.
Your Ethernet cable may be damaged. Try another cable.
All of the LEDs on the front of my modem look correct, but I cannot access the
Internet.
If the pwr, sync, and ready LEDs are solidly lit, the wireless cable
modem is working properly. Try restarting the computer so that is
could re-establish a connection with the wireless cable modem.
Power cycle the wireless cable modem by removing the power adapter
from the electrical outlet and plugging it back in. Wait several minutes for
the wireless cable modem to re-establish communications with your cable
service provider.
If your PC is connected to a hub or gateway, try connecting the PC
directly into the wireless cable modem.
If you are using a cable splitter, try removing the splitter and connect the
wireless cable modem directly to the cable wall outlet. Wait several minutes for the
wireless cable modem to re-establish communications with your cable service
provider. Your Ethernet or coaxial cable may be damaged. Try using another cable.
If none of these suggestions work, contact your cable service provider for
further assistance.
DDW2600/DDC2700
Installing the Modem Using the Ethernet Port