GPS receiver. This deliberately edited manual is to introduce the users, to provide the complete technical data that is needed, and so as to operate BT-48 smoothly and correctly as soon as possible. Make sure to read this manual carefully before using this product. Most problems will be solved through the explanations and the troubleshooting tips.
Product Description The SANAV BT-48 Bluetooth GPS Receiver is a mobile GPS receiver integrated with Bluetooth wireless technology. Combining the highly technical GPS receiver, mini antenna and Bluetooth technology all together from our innovative concept, BT-48 achieves the highlights of micro-sized, high gain, low power consumption, long battery life and totally wireless GPS solution.
◇ Finding streets and routes via GPS map software ◇ Travel/track planning ◇ Personal security and safety ◇ Application for Marine Navigation ◇ Fleet management GPS system ◇ GPS network timing ◇ In-car navigating/locating for public safety and emergency ◇ AVL GPS function www.sanav.com...
Device Size and Weight: 42 (W) x 63 (L) x 27.5 (H) mm, 80g Operating Temperature: -20°C to + 60°C Storage Temperature: -30°C to + 70°C Environmental: Relative Humidity: 5% to 95%, non-condensing Specifications subject to change without prior notice. www.sanav.com...
◇ Host Control Interface (HCI) Supports Bluetooth Serial Port Profile (SPP) 2.2 GPS Signal Reception The SANAV BT-48 offers 15m high position accuracy and 45sec TTFF cold start initial position fix. However, those performances depend on the location and the initial state of the receiver. The environmental factors that influence GPS TTFF and position accuracy are: ◇...
2.3 Connect BT-48 to Your Pocket PC 1 Load 3 fully charged AAA NiMH batteries into BT-48; make sure the batteries are loaded in their correct polarity (+or -) of the terminals. 2 Turn BT-48 on. The battery status LED will immediately be red to indicate power success.
Page 13
5 Tap the Bluetooth icon; select “Bluetooth Manager”. Note that the Bluetooth function should be on automatically when you initialize your Pocket PC. 6 In Bluetooth Manager “My Shortcuts” window, Tap “New” & “Connect” to find available Bluetooth devices and services. www.sanav.com...
Page 14
7 In the Bluetooth Connection Wizard, select “Explore a Bluetooth device” then tap “Next”. 8 Tap “Next ”to continue Bluetooth Connection Wizard. www.sanav.com...
Page 15
9 Await Pocket PC searching for Bluetooth devices. You will see “SANAV BTGPS” in your Bluetooth Browser window. Tap the icon to continue 10 Select Bluetooth available service “SPP” in the Service Selection menu, and tap “next” to continue. www.sanav.com...
Page 16
11 Now you successfully create Bluetooth Connection shortcut. Tap “Finish” to close the Connection Wizard program. 12 Now in the Bluetooth Manager menu, you will see the SANAV BTGPS shortcut in the list. Tap the icon still and select the Connect option.
Page 17
Bluetooth connection is on or not. 14 Await TTFF simultaneously, the GPS status LED will be Blue to indicate GPS positioning fix. 15 BT-48 will now automatically and continuously receive the satellites' GPS NMEA data and transfer to Pocket PC via Bluetooth for navigation application.
2.4 Pair BT-48 to Your Pocket PC 1 In “Bluetooth Manager” window—“My Shortcuts”, select “Tools” and “Paired devices”. 2 In “Bluetooth: Paired devices” window, tap “Add” button. www.sanav.com...
Page 19
3 In “Bluetooth: Device Pairing” window, tap “ ” icon to search for current available Bluetooth devices. 4 Waiting for Bluetooth device searching. You will see the SANAV BTGPS icon appearing in the following list. Tap SANAV BTGPS icon to continue.
Page 20
5 In “Bluetooth: Device Pairing” window, enter Passkey “6666” and then tap “ok” 6 See the Bluetooth is adding device: SANAV BTGPS www.sanav.com...
Page 21
7 Pairing completed. You can check your paired device in the Bluetooth Paired device or Connection Wizard window. www.sanav.com...
■ OziExplorerCE ■ Fugawi for Pocket PC ■ Microsoft Pocket Street ■ Mapsonic GPS Navigation Software ■ Maptech Pocket Navigator ■ Handmark Street Finder ■ Arcpad Street Map ■ PocketMap Navigation USA 2003 ■ Pocket Terra ■ Pocket Streetmap www.sanav.com...
3 Use the cigarette lighter inside your package. The DC output is designed as 5V at totally 3A with both mini-USB and DC jack. BT-48 and iPAQ Pocket PC can be both recharged at the same time in your vehicle.
Page 24
4 Insert mini-USB connector into your BT-48 electrical outlet as below. Note that mini-USB has the groove design to prevent reverse phase. Once the BT-48 is connected with mini-USB, its charging LED indicator will be blinking twice, and then stay red still. After the batteries are full of electricity, the recharging LED indicator will be turned off automatically.
Page 25
5 Also insert the other DC jack into the cradle/charger of your iPAQ Pocket PC. 6 Now you can use the recharging system and feel free of worrying about power consumption and operation time during the navigation in your vehicle. www.sanav.com...
Keep the cables from strong straining or folding for it may cause contact fault. Avoid storing and using the unit to extreme magnetic fields. Do not place or use the subject filled with highly flammable gas. www.sanav.com...
If you are experiencing difficulties with your BT-48, consult the following troubleshooting table for possible solutions. BT-48 Problems Problem Diagnosis Solution • Power failure • Batteries are run out • Check the power source installation of electricity • Reconfirm the power source is •...
Page 28
If you encounter problems during installation and operation that cannot be solved from the provided information in this manual, please contact your dealer or our technical support. Tel: +886-2-26879500 Fax: +886-2-26878893 E-Mail: sanav@sanav.com www.sanav.com...
Warranty Time Period and Repair Coverage SAN JOSE NAVIGATION, INC. warrants BT-48 to be free from all defects and malfunctions in materials and workmanship for a period of one year from the original purchase date from San Jose Navigation or authorized dealers.