Table of Contents
Advertisement
Note
•
Match the "left", "right", "+" and "-" terminals correctly. Revised polarity may degrade sound
quality.
•
Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the
amplifier. Most two channel amplifiers work well in this configuration. However, if two
4-ohm speakers, wired in parallel to a bridged two -channel amplifier, present a 2-ohm
mono load to the amplifier. Most 2-channel amplifiers do not support 2-ohm mono
operation! Amplifier damage may result!
8
Mount on the speaker as shown below.
9
Press and insert the edges of the grille net.
Tip
•
The speaker grille can be mounted without the grille net, if you like.
6
EN
Advertisement
Table of Contents
