Related Manuals for GreenWorks 25272
Summary of Contents for GreenWorks 25272
- Page 1 19" Cordless Self-propelled Lawn Mower 25272 Owner’s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.GreenWorksTools.com Read all safety rules and instructions carefully before operating this tool.
-
Page 2: Table Of Contents
CONTENTS Contents ..........................2 Product specifications ......................2 Safety information ......................3-7 Symbols ..........................8-9 Battery & Charger ......................10-12 Know your lawn mower ...................... 13 Assembly ........................14-18 Operation ........................19-24 Maintenance ......................... 25-26 Storage ..........................27 Environmentally safe battery disposal ................28 Service .......................... -
Page 3: Safety Information
SAFETY INFORMATION GENERAL SAFETY RULES READ ALL INSTRUCTIONS CAREFULLY W A R N I N G This symbol indicates important safety instructions. If these instructions are not followed, it could endanger the personal safety and/or property of the operator and others. Read and understand all instructions in this manual before attempting to operate the mower. - Page 4 SAFETY INFORMATION • Carefully read all instructions on the mower and in the manual before attempting to assemble and operate the mower. Keep this manual in a safe place for future reference, and consult it regularly. • Become familiar with all controls and their proper operation. Know how to stop the mower and how to disengage the power in an emergency.
- Page 5 BATTERY & CHARGER C A U T I O N USE ONLY GREENWORKS APPROVED REPLACEMENT BATTERIES, OTHER BATTERIES MAY CAUSE INJURY OR DAMAGE TO THE MOWER. Use with GREENWORKS 36V 10Ah battery.
- Page 6 SAFETY INFORMATION BATTERY RULES FOR SAFETY • Battery operated units do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards even when unit is not operating. • Remove the battery pack before making any adjustments, cleaning, or removing material from the unit.
- Page 7 SAFETY INFORMATION • Do not disassemble charger, take it to an authorised service station if repair is required. Incorrect reassemble may result in a risk of electric shock or fire. • Unplug charger from outlet before attempting any cleaning to reduce the risk of electric shock. •...
-
Page 8: Symbols
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) -
Page 9: Symbols
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. -
Page 10: Battery & Charger
BATTERY & CHARGER W A R N I N G Always remove the isolator key and store it in a separate location out of the reach of children when the mower is charging or not in use. Failure to remove the isolator key may result in accidental starting or unauthorized use and cause serious personal injury. - Page 11 BATTERY & CHARGER CHARGING THE BATTERY PACK Note: The battery can be charged in or out of the mower. • Make sure the power supply is normal household voltage, 120 V, 60 Hz, AC only. • Remove the isolator key and store in separate location out of reach of children. •...
- Page 12 BATTERY & CHARGER BATTERY METER Since the mower battery is shipped in a low charge condition, the battery must be charged before use. The battery has four LED lights to indicate battery capacity. These lights will illuminate when the button is pressed. If four LED lights illuminate, the battery is 100% charged and ready for use.
-
Page 13: Know Your Lawn Mower
KNOW YOUR LAWN MOWER Read this operator's manual and safety rules before operating your lawn mower. Compare the illustration in Figure 3 to your lawn mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Fig. -
Page 14: Assembly
ASSEMBLY INSTRUCTIONS UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. •... -
Page 15: Assembly Instructions
ASSEMBLY INSTRUCTIONS UNFOLDING AND ADJUSTING HANDLE (See Figure 4) • Pull up and back on the upper handle to raise the handle into operating position. Make certain the handles snap into place securely. • Tighten the upper handle with the cam locks on both sides. Handle knob Cam locks Fig. - Page 16 ASSEMBLY INSTRUCTIONS INSTALLING THE GRASS CATCHER BAG (See Figure 5) • Lift the chute cover (1). • Lift the grass catcher by its handle (2) and place under the chute cover so that the hooks (3) on the grass catcher frame are seated into the slots in the handle bracket. •...
- Page 17 ASSEMBLY INSTRUCTIONS INSTALLING SIDE DISCHARGE CHUTE (See Figure 6) • Lift the side discharge cover (1). • Align the grooves on the discharge chute (2) with the pins on the underside of the discharge cover (1). • Lower the discharge chute (2) until the hooks on the mower deck are secured in the openings in the discharge chute (2).
-
Page 18: Assembly
ASSEMBLY INSTRUCTIONS INSTALLING THE MULCHING PLUG (See Figure 7) • To remove the mulching plug, lift the chute cover (1). • Grasp the handle (2) of the mulching plug and pull the mulching plug out using the handle. • The mulching plug (3) is inserted on an angle, so it requires some force to remove it. •... - Page 19 OPERATING YOUR LAWN MOWER STARTING/STOPPING THE MOWER (See Figure 8) • Insert the isolator key into the slot on the motor/shroud assembly. • Press and hold the start button. Pull the power lever toward the handle and release the button to start the mower. •...
-
Page 20: Operating Your Lawn Mower
OPERATING YOUR LAWN MOWER CUTTING HEIGHT ADJUSTMENT (See Figure 9) When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the first time, raise the cutting position to the height best suited for your lawn. The average lawn should be between 1 1/2"... - Page 21 OPERATING YOUR LAWN MOWER ADJUST THE UPPER HANDLE HEIGHT (See Figure 10) • Loosen the upper handle knob. • Adjust the upper handle to the most comfortable of the 2 positions. • Snug the upper handle knob and lock the cam lock handle to secure. Cam lock handle Upper handle knob Lock...
- Page 22 OPERATING YOUR LAWN MOWER EMPTYING THE GRASS CATCHER BAG (See Figure 11) • Stop mower, allow blades to completely stop, and remove key. • Lift the rear chute cover. • Lift the grass catcher bag by its handle to remove from mower. •...
-
Page 23: Operation
OPERATING YOUR LAWN MOWER SLOPE OPERATION W A R N I N G Do not mow a slope that has an angle of greater than 15° (a rise of approximately 2-1/2 ft. [75 cm] every 10 ft. [3 m]). Mow across the face of a slope, and never up and down. •... - Page 24 OPERATING YOUR LAWN MOWER MOWING TIPS NOTE: A sharp blade will greatly enhance the performance of the mower, especially when cutting high grass. Be sure to check the blade and to sharpen it at least once per year, as described in the Maintenance section. •...
-
Page 25: Maintenance
ALWAYS remove the isolator key when servicing or transporting the mower. Use only a GREENWORKS replacement blade. • REMOVE BATTERY. • While wearing leather padded gloves, wedge a block of wood between the blade and the mower deck in order to prevent the blade from turning when the nut is being removed. - Page 26 MAINTENANCE REPLACING THE BATTERY The mower battery is designed for maximum life; however, like all batteries, it will eventually need to be replaced. Charge the new battery pack before use. See Battery & Charger of this manual. TO INSTALL A NEW BATTERY: •...
-
Page 27: Storage
STORAGE CLEAN THE MOWER W A R N I N G To reduce the risk of electric shock, do not expose the mower to water. The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and other debris will accumulate causing rust and corrosion. -
Page 28: Environmentally Safe Battery Disposal
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this battery pack: a toxic material. W A R N I N G All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. -
Page 29: Service
SERVICE • When ser vicing the mower, use only replacement par ts that are available from the manufacturer. In order to obtain replacement parts, call the toll-free helpline, at 1-888-909- 6757. The use of parts that do not meet the original equipment specifications may lead to improper performance, and may compromise safety. -
Page 30: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The battery is not charged. Charge the battery. The switch is defective. Replace the switch (call the tollfree helpline, at 1-888-909-6757 Grass jammed at blade. Remove battery; check under deck for The mower does jams. not start. -
Page 31: Warranty
(4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for... -
Page 32: Exploded View
EXPLODED VIEW... -
Page 33: Parts List
PARTS LIST ITEM NO. PART NO. DESCRIPTION 34115250 Foam grip 33303250-8 Upper handle 31110487 Motor engagement box assy. 31901250 Start cable (short) 34118250 Block 3220735 Screw 34110250-3 Upper cover, motor engagement box 34129250-2 Start button 33401229 Spring 34123469 Compressor 3221305 Nut M3 33315250 Spring... - Page 34 PARTS LIST ITEM NO. PART NO. DESCRIPTION 36503487 Cord, red 34106492 Key holder A 31201470 36501229 Connector 34105462 Retaining seat 32210131 Screw ST4×14-F 3220537 Lock nut M6 36101492 Motor 32208261 Nut M8 34101463-1 Motor bracket 3220135 Bolt M6×25 3220406 Bolt M8×16 32202234 Bolt 31104487...
- Page 35 PARTS LIST ITEM NO. PART NO. DESCRIPTION 33901250 Belt pulley 34201234-1 Drive belt 33302234-4 Link bar 33312234 Tension spring 32205234 Screw ST6.3×16-F 34102234-1 Rear baffle 32210234 Screw ST6.3×12-F 32207234 Bolt 3290506 Retaining ring 8 33905234-1 Height adjustment plate (left) 32910131 Nut M10 33310234 Torsion spring (left)
- Page 36 TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Rev: 01 (10-12-12) Printed in China on 100% Recycled Paper...
Need help?
Do you have a question about the 25272 and is the answer not in the manual?
Questions and answers