Channels Appointment - Haier 29FA10-AM Owner's Manual

Setting the Timer
The channels appointment function can help you conveniently preset programs.
At the preset time, the TV set will automatically change to the preconcerted
channel. If two or more programs are set in a same time, the last channel
number will be selected.

Channels appointment

CH+
VOL- VOL+
MENU
CH-
CH+
VOL- VOL+
MENU
CH-
DISP
(coutinued)
Channels appointment
1. Press MENU button
continuously until select
TIM menu, press CH+/-
button to select CLOCK and
VOL+/- button to set the time.
(The method is the same as
OFF TIMER. It is the standard
of the clock of APP. POS)
2. Press CH+/- button, move
the indicator to APP.TIME.
Then press VOL+/- button to
set the time(the method is the
same as OFF TIMER ).
Repeatedly press VOL+/- button,
the time changes with a rate of
one minute;
Press the button without
releasing, the time changes with
a rate of ten minutes.
3. Press CH+/- button, move
the indicator to APP.POS.
4. Press VOL+/- button to set
the channel number you want
(e.g. 100).
At the preset time, the TV set will automatically change
to the preconcerted channel;
This function is only available when the TV set is on, and
it cannot be used in the status of standby or power off.
TIM
CLOCK 18:00
OFF TIMER 18:20
ON TIMER 19:00
ON POS 1
APP. TIME OFF
APP. POS 0
TIM
CLOCK 18:00
OFF TIMER 18:20
ON TIMER 19:00
ON POS 1
APP. TIME 19:30
APP. POS 0
TIMER
CLOCK 18:00
OFF TIMER 18:20
ON TIMER 19:00
ON POS 1
APP. TIME 19:30
APP. POS 100