Table of Contents
Advertisement
Adjusting the Picture and the Sound
(continued)
Multiple Sound Modes and Setting the Sound
S.STD
CH+
MENU
VOL-
CH-
S.STD
How to select the sound mode
You can quickly select your most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.LOW VOL/
NORMAL VOL/ HIGH VOL can be
selected in turn(their parameter may
be adjusted due to your need).
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the LOW VOL/
NORMAL VOL/ HIGH VOL).
1. Press MENU button continuously until select
SND menu.
2. Press CH+/- button, move
the indicator to the HIGH VOL,
then press VOL+/- button to
VOL+
adjust the parameter you
expect. With the same method,
you can adjust the parameter
of the LOW VOL and NORMAL
VOL
Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL
is C, they should be: 0 A B C 100
You should adjust them in the sequence of HIGH VOL,
NORMAL VOL and LOW VOL .
BALANCE on this OSD is just available in some models.
3. Press the S.STD button repeatedly to select the
different sound setting modes.
LOW VOL
NORMAL VOL
HIGH VOL
SND
LOW VOL
00
NORMAL VOL
00
HIGH VOL
00
BALANCE
50
Advertisement
Table of Contents
