Configuring The Wan Setup Options; Disabling The Spi Firewall; Setting Up A Default Dmz Server - NETGEAR WNR2000v2 User Manual

NETGEAR Wireless-N 300 Router WNR2000v2 User Manual

Configuring the WAN Setup Options

The WAN Setup options let you configure a DMZ (demilitarized zone) server, change the
Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the
WAN (Internet) port. Select WAN Setup under Advanced in the main menu. The WAN Setup
screen displays.
Figure 4-4

Disabling the SPI Firewall

The Stateful Packet Inspection (SPI) firewall protects your network and computers against attacks
and intrusions. A stateful packet firewall carefully inspects incoming traffic packets, looking for
known exploits such as malformed, oversized, or out-of-sequence packets. The firewall should be
disabled only in special circumstances, such as when you are troubleshooting application issues.

Setting Up a Default DMZ Server

The default DMZ server feature is helpful when you are using some online games and
videoconferencing applications that are incompatible with Network Address Translation (NAT).
The router is programmed to recognize some of these applications and to work correctly with
Customizing Your Network Settings 4-8
v1.0, January 2010