Mail Service Settings - INSTEON 75791 Owner's Manual

INSTEON® Outdoor Wireless IP Camera

3.10 Mail Service Settings

If you want the camera to send email notifications when motion has been detected, configure
Mail Service Settings.
Make sure your sender address supports SMTP. Four recipients can be added to receive images.
Use the correct SMTP port for your server; some SMTP servers require a specific port such as
587 or 465, so check with your ISP. Transport Layer Security usually is None, but check with
your ISP to be sure. If you use Gmail, Transport Layer Security must be set to TLS or
STARTTLS and SMTP Port must be set to 465, 25 or 587. Click Submit.
Click Test to see if SMTP has been successfully configured.
If one of the following errors occurs, check the information you entered, then click Test again:
insteon.com
28