Britax Marathon 65 User Manual page 23

1 Firmly press the lower connectors
onto the adjacent lower anchors.
A click confirms attachment.
Verify that the lower connector
strap is not twisted.
TIP: You may need to turn the front
of the child seat toward you
for easier access to the lower
anchors.
NOTE: If a click is not heard when
connecting either lower connector, the
lower connector strap may be twisted,
or there may be debris in the lower
connector. Correct either situation
before continuing with the installation
process.
2 Push the child seat down while
pulling each lower connector
strap to tighten.
3 Rear-facing installations can be
improved by the use of the Versa-
Tether (see pages 17 – 19).
Checklist
Check that all connections are secure.
Check that the lower connector straps are not twisted.
Check that the child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat is not secure,
repeat installation or use a different seating location.
Check that the back angle of the child seat is 30º – 45º from vertical
(not to exceed 45º) when the car is parked on a level surface.
* If necessary, the proper recline angle can be achieved by
placing a rolled towel or pool noodle in the vehicle seat bight.
Rear-Facing Installation
Rear-Facing Installation
1
2
21