Thank you for selecting the Force 10 Electric Galley Range. Your unit was carefully inspected and tested at our factory. Please take the time to read this manual carefully; many of its instructions are essential to the safe operation of your new Force 10 Electric Range Because of the continuing refinement of our product designs, your Range may possess features not discussed in the manual.
ELECTRICAL REQUIREMENTS Model Voltage Freq. Surface Element Oven or Broiler Maximum (each) Element 65335 100 - 120 50 - 60 1200 W 10 A 1300 W 10.8 A 4900 W 41 A 75331 100 - 120 50 - 60 1200 W 10 A 1300 W 10.8 A...
Page 5
65335 / 65336 Installation Cutout Dimensions: Width: 20.375” (518 mm) Depth: 21” (534 mm) Height: 21.75” (553 mm) The opening between the cabinets should be 20.375” (518mm) wide, a minimum of 21” (534mm) deep and 21.75” (553mm) high for proper gimbal.
Electrical connection This product must be installed in accordance with national and local electric codes. It must be supplied with the rated voltage and frequency and hardwired to it own branch circuit, protected by an appropriate sized circuit breaker. USE COPPER WIRE ONLY OPERATION Theory Glass ceramic cooktops require radiant heating elements.
Oven Door Your Force 10 Electric Range is equipped with a slide away space saving door. To open the door, lift up on the handle and pull towards you. The door will fold underneath the oven.
Page 8
"grain" of the metal. Changing the light bulb Your Force 10 oven is equipped with a light. The light bulb is located in the top right hand corner of the oven and is screwed into the socket. To remove the bulb, unscrew it clockwise. The replacement should be an A15 type - 40 watt frosted appliance bulb rated at the appropriate AC Voltage.
A15 - 40 W A15 - 40 W Limited Warranty Force 10 Manufacturing warranties this Electric Range to the original consumer to be free from defective material(s) and workmanship while under normal use and service for a period of (2) year.