Table of Contents
Advertisement
If the deposit does
not clean off easily,
use a non-abrasive
scratch pad and a
specially adapted
glass-ceramic
cleaning product.
Stainless Steel Cleaning Instructions
Do not use abrasive pads; they will scratch the surface
The basic rule of thumb is to use the mildest cleaning procedure that will do an
effective job. Always rinse thoroughly with clear water and dry completely. Frequent
cleaning will prolong the service life of stainless steel equipment and help maintain
the finish. Ordinary deposits of waste and fluids can usually be removed with soap
and water. More stubborn deposits or stuck on debris may require harder rubbing or
the use of commercial cleaning products acceptable for use on metal surfaces. When
using any cleansing agent, the rubbing should be in the direction of the polish lines or
"grain" of the metal.
Changing the light bulb
Your Force 10 oven is equipped with a light. The light bulb is located in the top right
hand corner of the oven and is screwed into the socket.
To remove the bulb, unscrew it clockwise. The replacement should be an A15 type -
40 watt frosted appliance bulb rated at the appropriate AC Voltage.
If the deposit does
not clean off with
any of the above
mentioned methods,
use a razor blade
scraper, specially
designed for glass
ceramic cook-tops.
Having successfully
cleaned the cook-top,
apply a glass ceramic
cook-top conditioner
which will protect the
cook-top surface
against any future
stains, with a dry cloth
or equivalent.
Page 6 of 8
ENG-0091.3
Hide quick links:
Advertisement
Table of Contents
