Vax Floormate Freedom V-122 Instruction Manual page 8

Vax V-122 User Guide.qxd
www.vax.co.uk
Fig.5/2
Remove nozzle by pulling straight out (Fig.5/3).
Fig.5/3
Rinse nozzle under running water. Remove debris from
squeegee at the front of the nozzle and wipe with a damp
cloth.
To replace nozzle, make sure latches are out. Cleaner
should be in the upright position for easier assembly of the
nozzle (Fig.5/4).
Fig.5/4
Align middle section of nozzle with opening on cleaner.
While holding nozzle in place, slide latches inward to lock in
place (Fig.5/5).
8
maintenance
29/6/07 13:49 Page 8
Fig.5/5
Cleaning the Brushes
Turn cleaner off.
Remove tanks to prevent possible leaks. Set tanks aside.
Turn cleaner over so that the bottom is facing up. Carefully
remove debris from the rotating brushbar (Fig.5/6).
Fig.5/6
cleaning the rotating brushbar.
Representative. The appliance has no user serviceable
parts.
Storage
Turn cleaner OFF. If battery needs charging, refer to the
"Battery Charging" section on page 4.
Empty and rinse clean and dirty water tanks. Allow to air
dry.
Allow filter in dirty water tank lid to dry.
Make sure that nothing is pressing on the nozzle
squeegee.
Do not store cleaner on a wood surface unless cleaner is
completely dry.
WARNING: Rotating
!
suddenly. Extra care must be taken when
CAUTION: Any other servicing should be
!
performed by a Vax Authorised Service
brushbar can start