Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Craftex Ct169
Summary of Contents for Craftex Ct169
- Page 1 CT169 8” BENCH GRINDER with 28”x 2” BELT SANDER User Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS General Safety Instructions for Machines ............... 3 Specific Safety Instructions..................4 CT169 Features ...................... 5 Physical Features ....................6 Proper Grounding ....................7 Un-Packing ......................8 Mounting ......................... 8 Eye Safety Shield....................8 Tool Rests....................... 9 Belt Tracking ......................9 Dust Port......................... -
Page 3: General Safety Instructions For Machines
GENERAL SAFETY INSTRUCTIONS FOR MACHINES Extreme caution should be used when operating all power tools. Know your power tool, be familiar with its operation, read through the owner’s manual and practice safe usage procedures at all times. ALWAYS read and understand the NEVER leave a tool unattended while it user manual before operating the is in operation. -
Page 4: Specific Safety Instructions
CT169 - 8” BENCH GRINDER w/BELT SANDER SPECIFIC SAFETY INSTRUCTIONS ALWAYS read and understand the NEVER LEAVE machine user manual before operating the unattended while it is running. grinder. MAKE SURE to do a “ring test” on the MAKE SURE you are wearing safety... -
Page 5: Ct169 Features
FEATURES MODEL CT169 – 8” BENCH GRINDER with BELT SANDER As part of the growing line of Craftex woodworking equipment, we are proud to offer the CT169, an 8” Bench Grinder with Sander. The Craftex name guarantees Craft Excellence. By following the instructions and procedures laid out in this user manual, you will receive years of excellent service and satisfaction. -
Page 6: Physical Features
CT169 - 8” BENCH GRINDER WITH BELT SANDER PHYSICAL FEATURES... -
Page 7: Proper Grounding
It is strongly recommended not to use resistance for electric current to reduce the extension cords with your CT169. Always risk of electric shock. try to position your machine close to the power source so that you do not need to Make sure the cord is plugged into a use extension cords. -
Page 8: Unpacking
EYE SAFETY SHIELD The CT169 is provided with 4 pre-drilled The CT169 is provided with an eye safety holes on its base to allow it to be mounted shield which is positioned at 1/8” from the on a workbench. -
Page 9: Tool Rests
(which moves the sanding belt at the same supports the tool during operation. The time) and check where the sanding belt CT169 is provided with a tool rest for rides on the top roller. grinding and a work stop for belt sanding. -
Page 10: Dust Port
DUST PORT TEST RUN CT169 features a 1-1/8” dust port located Once you have assembled the machine under the rollers. When connecting to a and verified that grinding wheel is secured dust collector, use a proper sized hose and and belt is tensioned and tracking properly,... -
Page 11: Grinding Wheel Inspection
GRINDING WHEEL GRINDING WHEEL INSPECTION REPLACEMENT The CT169 comes with an 8” diameter, A36 To replace the grinding wheel: grit aluminum oxide grinding wheel. The grinding wheel should inspected Make sure the switch is in the OFF position properly before installation. -
Page 12: Sanding Belt Replacement
SANDING BELT REPLACEMENT Take the belt off the rollers and replace with To remove and replace the sanding belt: a new one. Make sure the switch is in the OFF position Move the belt tension lever down to tension and the cord is disconnected from the the belt and reinstall the belt cover. -
Page 15: Warranty
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras. Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.
Need help?
Do you have a question about the Ct169 and is the answer not in the manual?
Questions and answers