Refrigerator Compartment - Haier HRF-663ASA2* User Manual

Freezer compartment
Use the freezer compartment for
long-term food storage
A low temperature in the freezer compartment is
necessary for long-term food storage. Do not
exceed the maximum length of storage indicated
on the package.
Removing and cleaning glass shelves
First, lift the rear of the shelf in direction (1), and
then pull the shelf out in direction (2). Finally, tilt
the shelf in direction (3) and remove it once the
door is open 90º.
Interior light and replacement of
bulb
Bulb specifications: 220-240 V / 25 W
Socket: E27 (Do not use a replacement bulb of
more than 25 W.)
Replacing the bulb
● Pull out the power plug or neutralise the fuse.
● Lift the cover in direction (1), and then
pull it out in direction (2).
● Twist the bulb anticlockwise, and then remove
it. Install a new bulb of equal specifications.
● Re-install the cover.
Adjusting and cleaning bottle rack
Hold both sides of the bottle rack and pull it out in
directions (1) and (2). Clean the bottle rack, and
then re-place it or adjust its position.
Caution:
Frozen foods (such as ice cream) should not be placed in the bottle rack but rather inside the freezer
compartment to avoid that they spoil as a result of being exposed to the temperature changes from
opening and closing the door.
Refrigerator
compartment
Use the refrigerator compartment for
short-term food storage
The average refrigerator temperature of
0 °C-10 °C is not low enough for long-term
storage of foods; it is suitable only for
short-term food storage.
Adjusting the height of glass shelves
The shelves are height-adjustable to
accommodate various item sizes.
The shelves can be taken out for height
adjustment and cleaning. To clean a shelf,
pull it in direction 1, and then tilt it in
direction 2 until it is in a vertical position.
Finally, remove the shelf in direction 3. To
remove a shelf, the appliance door must be
open 90º.
Adjusting and cleaning bottle rack
Hold both sides of the bottle rack and pull it
out in directions (1) and (2).
After cleaning, re-place the bottle rack or
adjust its position.