Content Of The Box; Unpacking, Placement And Set-Up (Pc) - Mermaid Ventura 170 TFT User Manual

mermaid ventura 170 TFT - User manual Version 1.0
___________________________________________________________________________________

3. Content of the Box

ventura 170 TFT (17")
"Quickstart" card
Accessories bag including:
PSU (45 Watt)
Powercord
Speaker cable
Users manual
Glass cleaner & screen wiping cloth

4. Unpacking, Placement and Set-up (PC)

After the box has been opened, remove the accessories bag.
Bend the cardboard flaps outward and turn the box upside down, which will ensure the inlay foam with the monitor is able
to slide out. Do not drop the content on the floor.
Remove the foam side pieces and the plastic bag.
The monitor needs to be placed on a smooth and stable surface. This surface must be able to safely support 15 kg.
Make sure both the computer and monitor are turned off before connecting the monitor.
Connect the monitor to the computer by means of the supplied VGA cable. (Attached to the monitor)
Connect the PSU to the monitor and AC outlet.
Turn on the computer and monitor.
OSD panel is located
beneath the monitor
mermaid ventura 170 TFT is plug & play compatible via VESA DDC1/2B. Windows 98, ME and XP will recognise this
and self configure.
When using the mermaid ventura 170 TFT with Windows NT, the computer needs to be started in VGA mode the first
time. Log on as administrator and set the resolution to 1280x 1024 and refresh rate to 60 Hz. The computer can then
be started in normal mode.