Installing The Attachment Hose/Extension Tubes - Kirby Sentria II Owner's Manual

Canister Cleaner & Attachments
CAUTION:
!
! CAUTION:
4
At the connector end of the Attachment Hose, you will notice two
hooks. Place the hooks over the ends of the Attaching Bar , then
push the opening of the hose up against the Sentria ® system.
5
Lock the Attachment Hose Connector in place by turning
the Accessory Lock  all the way to the right (clockwise).
(Accessory Lock will clamp the Attachment Hose to the unit.)
Then lower the Headlight Hood.
With the Attachment Hose in place, the unit will automatically adjust
to high speed for hose operation.
NOTE: If the Sentria system will not run when the Power Switch
is ON, see page 44. ❏
INSTALLING ATTACHMENTS ON THE
ATTACHMENT HOSE
To attach tools to the hose, push lightly while twisting the smaller
end of the hose into the tool. ❏
EXTENSION TUBES
One or two Extension Tubes can be attached to the end of the hose
to extend your reach and efficiently use various attachments. ❏
In normal operation, friction between the belt and the metal motor
shaft may cause the metal motor shaft to become hot to the touch.
Keep motor shaft free from lint, hair, and debris build-up.
17
➤