LG DLE1001W Owner's Manual page 36

36
TROUBLESHOOTING
Before calling for service (cont.)
Clothes are
wrinkled
after cycle ends.
Drying time is
dampness of clothing is not
not consistent
consistent.
Clothes take
too
long to dry
properly.
duct run is too long.
breaker has tripped, or power
outage has occurred.
Clothes are
shrinking not being followed.
light is on full.
during the
drying cycle
FLOW SENSE
indicator many turns/restrictions.
shows four
bars during the ductwork due to lint buildup or
drying debris.
cycle
restriction in the external dryer
venting.
Try a shorter drying time, and remove items while they
still retain a slight amount of moisture.
of the clothes, and the condition of the exhaust ducts and
lint filter.
heavier items take longer to dry.
retain more moisture. To help reduce and maintain more
consistent drying times for large and heavy fabrics,
separate these items into smaller loads of a consistent
size.
you are drying.
some loads that produce high amounts of lint, it may be
necessary to clean the filter during the cycle.
outside wall dampers can open properly and are not
blocked, jammed, or damaged.
fuse capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
to ensure proper tumbling action.
care instructions for your garment, because some fabrics
will naturally shrink when washed. Other fabrics can be
washed but will shrink when dried in a dryer. Use a low or
no heat setting.
Instructions.
Dryer can be used in this condition, but drying times may
be longer.
system, the indicator will remain on for two hours after
the end of the cycle. Opening the door or pressing the
POWER button will turn off the display.