Table of Contents
Advertisement
Activate PTZ Preset on Sensor
1.
Create PTZ Preset Position. See instructions in the PTZ Setup Chapter.
2.
Click the Setup button on the Main Display Screen.
3.
Click the Alarm Setup button to open the Sensor and
Output Display.
4.
Click the Sensor Preset button.
5.
Select the desired camera from the Channel List.
6.
Select the appropriate sensor from the list.
7.
Select the preconfigured PTZ Preset from the list.
8.
Click the Set button. A list of configured Sensor Presets
will display in the box below.
9.
Repeat for additional sensors.
10. Click the OK button to close the Sensor Preset window.
47
Advertisement
Table of Contents
