[Sound] Menu; Digital Output - LG RH735T Owner's Manual

[SOUND] Menu

Each disc has a variety of audio output options. Set
the unit's Audio options according to the type of
audio system you use.

Digital Output

Select the output sound format when a device
equipped with a HDMI or Digital Audio input jack is
connected to the HDMI OUT or OPTICAL (DIGITAL
AUDIO OUT) jack on this unit.
[PCM Stereo]
Select if you connect this unit's HDMI OUT or
OPTICAL (DIGITAL AUDIO OUT) jack to a device
with two-channel digital stereo decoder.
[Primary Pass-Thru]
Select if you connect this unit's OPTICAL
(DIGITAL AUDIO OUT) and HDMI OUT jack to a
device with LPCM, Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS and DTS-HD decoder.
Sampling Freq.
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit automatically
converts any 192 kHz signals to 96 kHz so your
system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
27
System Setting
3