BIDET FITTING
with
EverClean™ Finish
Congratulations on purchasing your American Standard faucet
with EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Required Tools
Flat Blade Screwdriver
Phillips Screwdriver
Roughing-in Dimensions
TRANSFER VALVE (FOR FLUSHING
RIM OR SPRAY)
BIDET OUTLINE
IS SYMBOLIC
ADJ. 1-1/4
DOUCHE SPRAY
TO 2-1/4
3-7/8
5-1/2
(C)
1-3/16 DIA.
1-1/4 MAX.
FINISHED
FLOOR
*Wrench
*Hex key
*Supplied with Fitting
7/8 DIA.
2-1/8
DIA.
1-3/8
DIA.
FINISHED
WALL
1-1/4 O.D. TAILPIECE
8 TO 12
DIVERTER AND
VACUUM BREAKER
ASSEMBLY
(H)
2-1/4
DIA.
4-1/4
FOR GROUND JOINT
CONNECTION OR 1/2 "
O.D. SLIP (INLETS)
REAR VIEW WITH
WALL REMOVED
Installation
Instructions
8391.000
Adjustable Wrench
BIDET FAUCET INSTALLATION
Place MOUNTING NUTS (1) onto the VALVE BODIES
(2) and insert VALVE BODIES (2) through outside
holes, from underside of the BIDET LEDGE. Drop the
RUBBER RING (3) over the VALVE BODIES (2) and
screw on the ESCUTCHEON (4) until it locks against
the internal stop.
Tighten the MOUNTING NUT (1) to secure the
VALVE BODY (2).
Remove MOUNTING NUT (9), FRICTION RING (10)
and UPPER GASKET (7) from TRANSFER VALVE (8)
and insert into the center forward hole of BIDET.
Replace UPPER GASKET (7) and FRICTION RING (10).
Position the side threaded outlet rearward and secure
MOUNTING NUT (9). Thread ESCUTCHEON (5) onto
TRANSFER VALVE (8) until it seats against the
BIDET LEDGE.
4
3
BIDET
LEDGE
Certified to comply with ASME A112.18.1M
U.S. Patent No. 5,819,789
Channel Locks
Turn off hot and cold water
CAUTION
supplies before beginning.
5
HOT
1
8
9
10
2
COLD
7