Connect And Set Up A Home Network - Philips HTB5151K/93 User Manual

Note
•
To change the EasyLink control settings, press
(Home), select [Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
• Check that you have enabled EasyLink
on all the devices, (see 'Set up EasyLink
(HDMI-CEC control)' on page 15) and
• on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.
1
Press (Home).
2
Select [Setup], and then press
3
Select [EasyLink] > [System Audio
Control] > [On].
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4
Select [EasyLink] > [Audio Input
Mapping].
5
Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
Connect and set up a home
network
Connect your home theater to a network
router through wired or wireless network
connection, and enjoy:
• Streamed multimedia content
• Smartphone control
16 EN
•
•
Before you start
•
•
.
Set up the wired network
What you need
•
•
LAN
1
2
Software update (see 'Update software
through the Internet' on page 33)
Caution
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
For software update, make sure that the
network router has access to the Internet
with high-speed connection and is not
restricted by firewalls or other security
systems.
Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
A network cable (RJ45 straight cable).
A network router (with DHCP enabled).
Using a network cable, connect the LAN
connector on your home theater to the
network router.
Press (Home).
www