Cable Tie - Crosley CFW4500KW0 Installation Instructions Manual

Connecting drain and electrical
,
,
Snap one end of the drain hose hanger (shipped in washer
drum) onto the drain hose. Continue wrapping it around
the hanger and snap it in place.
Place the hook end of the drain hose in the drain opening.
Secure the drain hose with the cable tie (provided in the
enclosure package) to the standpipe, inlet hose, laundry
tub, etc. so the hose does not pull out from the force of
the water.
Check to ensure the power is off at circuit
breaker/fuse box before plugging the power cord into outlet.
3. Plug the power cord into a grounded outlet.
Do not, under
any circumstances,
cut, remove, |
or bypass the |
grounding _
Powercordwith
:3-prong grounded p!ug
4. Turn on the power at a circuit breaker/fuse box.
5. Carefully slide the washer to its final position. Recheck
for level and rock corners for stability. Remove and discard
door tape.
6. Read the Use & Care Guide provided with the washer. It
contains valuable and helpful information that will save
you time and money.
7. If you have any questions during initial operation, please
review the "Service Prevention Checklist" in your Use &
Care Guide before calling for service.
8. Place these instructions in a location near the washer for
future reference.
A wiring diagram and technical data sheet
are located under the washer top panel, on top of the
detergent dispenser housing.
CABLE TIE
10