Table of Contents
Advertisement
Available languages
Available languages
LP CONVERSION
KIT
P/N PCK4200
Gas dryers intended for use in a location supplied with LP must use a
conversion kit prior to installation.
MOBILE
HOME
INSTALLATION
KIT
P/N 137067200
Installation in a mobile home requires the use of a MOBILE HOME
INSTALLATION KIT.
Failure to use accessories manufactured by
approved by) the manufacturer could
result in personal injury, properly damage
or damage to the dryer.
DRYING
RACK
P/N 137O673OO
Depending on the model you purchased, a drying rack may have been
included in the initial purchase of your dryer. If your model did not include
a drying rack or you desire another drying rack, you may order one.
UNIVERSAL
APPLIANCE
WRENCH
P/N 137019200
A UNIVERSAL APPLIANCE WRENCH is available to aid in dryer or washer
feet adjustment.
TOUCH
UP PAINT
PENS*
Classic White Touch Up Pen - P/N 5304468812
*Other colors may be available. Contact the source where you purchased your dryer.
///
Technical Sheet/Wiring
Diagram:
A wiring diagram and technical data sheet are located
To remove the console faceplate follow the directions
below:
1. Disconnect dryer from electrical source.
2. Remove the hole plugs on the back of the console
housing.
3. Insert a small, straight blade screw drive to gently pry
downward on each faceplate retaining tab.
4. Gently lay the console faceplate forward without
pulling wires to access technical/wiring
diagram.
5. When finished with repair, return sheet inside console,
snap faceplate to console housing and reinstall hole
plugs.
TECH DATA SHEET/
WIRING DIAGRAM
Replacement
parts:
If replacements parts are needed for your dryer, contact
the source where you purchased
your dryer or refer to
your Use and Care Guide for more information.
ELECTRICAL
SHOCK
HAZARD
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
Advertisement
Table of Contents
