Window
Door
Reversal
Instructions
...............
:"""-I
Figure 1
1 Open door and remove four (4) plugs in the door opening
opposite the hinges Retain all parts for uses later, unless
otherwise noted (Figure 1) Note: Use care in removing plugs
in not scratching paint on the front panel
i
4,
t
Figure 4
5 Remove two (2) door handle screws and two (2) hole plugs
from door Again taking care not to scratch paint on door
(Figure 4)
,,,,,,,,,,,,,,,,,,,
..........
_b
......... _,;_ r,.,_..
""_
_
_"
_f,_ , ,',
Figure 2
2 Beg_nremowng the four (4) screws that attach the h_nge to
the front panel (Figure 2) For best results, start by only
removing one screw per hinge Then only loosen the two
remaining screws while firmly holding door to prevent damage
to hinge, front panel or door After the remaining screws are
loosened, continue to remove all
i,,,,,,,,,,,,,,,,,,v,,,,,,,,,,,i
....................................
_,_,,_; _;, _ ;:-,,,;,,_d_/_ _:_ _ ..........................
, _,_,,_,_-_,_
_:,_9_/!,;_ o _,_ ..................
_:,_
_,4_:'_"!_
.........................................................
/
Figure 3
3 Place door on a towel or pad handle side down to prevent
any possible scratches to door Remove all remaining four (4)
screws between hinge and door (Figure 3)
4 Remove four/4) screws from s_deof door opposite of where
hinge was mounted
'"
,,,
Figure 5
Pull handle away from door assembley (Figure 5)
Figure 6
7 Separate the outer door from the inner door assembly with
a putty knife or flat screw driver
(Figure 6)
14