Frigidaire PLEW30S3FCB Installation Instructions Manual page 3

B.Installationfor a cutoutheightof 91/4 ( 23.5cm)
(for30"Warmer Drawer only):
1. Locatethe 2 anti-tip bracketsand the 2 front
supportssuppliedasshownon figure3. Fixthem
using the 4 black head screws(10-16 X lY4")
supplied
2. Install t he 4 spacers ( Figure 4 ) supplied under drawer
asshown in figure5 using the4 screws ( 10-24 X %").
Install t wo spacers o neach sideof drawer.
3. Slidethe drawerinto the cutout openinguntil the
front frame of the drawer is flush against the
cabinet. B ecareful n ot to pinchtheelectrical cord.
4. Remove t he drawerasinstructed in the Use&
Care
Guide and secure the drawer housing to the cabinet
using the 2 black head screws (8-18 X Y2") supplied
(see Figure 2). Do not overtighten screws.
5. The 60" (152 cm) appliance power cord can now be
connected into the 120 Volt outlet.
6. Proceed with mounting the built-in oven above the
drawer (if applicable). Follow the installation
instructions provided with the built-in oven. Make
sure to use the anti-tip brackets supplied with the
built-in oven.
Anti-tip Bracket
Front Su
7"
Figure 3
S SPACER
SCREW
Figure 4
i
Use the screws supplied to fix
the drawer support
Figure 5