Audio Mode Configuration - PRICOM Design Dream Player MK2 User Manual

Using your Dream Player MK2

4.4 Audio Mode Configuration

The last category is the audio output preferences. This section allows you to make a few
simple adjustments to adapt the MK2 to your specific situation. Your project may require
a quicker fade than the default settings or maybe you need instant stoppage of playback,
and what if the output seems too loud? You may change the settings here to suite your
needs very specifically.
Feature
Master Volume
No Fade
Fade Time
Description
The output volume of the Dream Player may be adjusted to your
situation. For example if you have a set of speakers in your project but
cannot access the volume on the physical speaker you may adjust the
volume that the Dream Player produces.
One of the most self explanatory features in the file. If you want the
Dream Player to fade, leave this feature disabled with a "#" in front of
it. If you want the audio to instantly stop instead of fading then activate
the feature.
A neat feature of this CONFIG.TXT file is that you may customize the
fade time exactly to the millisecond that you need. You may use
anything from 1MS to 65000MS. If you have No Fade enabled then the
fade time is irrelevant.
PRICOM Design Page 22