Control Output Setup - PRICOM Design Dream Player MK2 User Manual

4.3 Control Output Setup

You may want to control some LED‟s, motors, or some other form of "action" items. In
this section of the CONFIG.TXT file you may select whether you want the output item to
be active as long as the file is playing or only at the beginning or end of the track.
Feature
Control Begin
Control End
Control Play
Control Pulse Time
Page 21
Description
When the track starts playing and you have this feature enabled, the
output device will be active for the specified amount of time as defined
in the later CONFIG.TXT file then stop for the remainder of the track.
Just the opposite of the Control Begin (funny how that works). That
means that the output device will become active for the specified
amount of time after the file plays.
The control output will simply stay active as long as the file is playing.
You may define exactly how long the output is active. Times are
defined in Milliseconds and if our math is right 1000MS amounts to 1
full second, you can actually set your output to pulse for just 1MS.
Doubtful it will be of any interest flashing an LED for 1MS, but maybe
one of you has the application that requires such a rapid output. If both
Control Begin and End features are disabled then the pulse time is not
used
Dream Player MK2 – User Manual
Using your Dream PlayerMK2