ADDER A.I.M. User Manual page 16

Dashboard > Settings > Time
This page deals with all time related settings for the installation.
NTP Enabled
Determines whether an external Network Time Protocol server should be used to
provide timing for the installation.
Date, Time, Time Zones
Use these entries to pinpoint the current time, date and location of the installation.
Dashboard > Settings > Mail
This page sets up the email functionality of the A.I.M. server if required. An external Email
server is required to sit on the network if this functionality is to be used.
Mail Enabled?
Determines whether the mail features of A.I.M. should be invoked.
sMTP Domain name/IP
Enter the name or IP address of the external SMTP server that will be used to process
all outgoing mail.
sMTP Port
Enter the appropriate port on the SMTP server.
Username, Password
Enter the appropriate username and password for access to the SMTP server.
email Address for Alerts
Enter the email address that will be used to send alert messages.
Dashboard > Settings > Active Directory
This page sets up the active directory server, if there is one on your network, and to use
active directory to maintain the user database.
AD Enabled?
Determines whether Active Directory features will be used.
Account Suffix
Enter the account suffix for your domain.
base DN
Specify the base Distinguished Name for the top level of the directory service database
that you wish to access.
Domain controller
Enter the IP address or name of the server that holds the required directory service.
Username, Password
Enter the username and password for the domain account.
sync schedule
Choose the most appropriate synchronization schedule, from hourly intervals to daily or
weekly.
15