Related Manuals for Fantom FM710K
Summary of Contents for Fantom FM710K
- Page 1 HARD SURFACE STEAM CLEANER OWNER’S MANUAL Model FM710K 120V., 60Hz., 1000 Watts FANTOM 94 Main Mill Street, Door 16. Plattsburgh, NY 12901 Tel: 1 (800) 275-9251 www.fantom.com...
-
Page 2: Important Safety Instructions
• Use only as described in this manual. within one year, FANTOM. will repair or replace any defective part provided the disconnect. Use only manufacturer’s recommended Do not allow cord to touch hot surfaces. - Page 3 USAGE SUGGESTIONS FOR YOUR HARD SURFACE ADDITIONAL IMPORTANT SAFEGUARDS cont. STEAM CLEANER 1. To avoid circuit overload, do not operate another appliance on the same socket (circuit) 2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used. CAUTION: This appliance must be unplugged from the electrical outlet Cords rated for less amperage may overheat.
- Page 4 GETTING TO KNOW YOUR HARD SURFACE STEAM USAGE SUGGESTIONS FOR YOUR HARD SURFACE CLEANER STEAM CLEANER Upholstery Use the steam diffuser with the cleaning cloth. Use fast, light strokes, avoid getting the fabric wet. Be patient with stubborn spots; work on a spot gently for no more than a minute at a time, then wait five minutes for the area to dry and repeat.
- Page 5 OPERATING INSTRUCTIONS FEATURES Small Detail Brush / Angle Adapter The FANTOM HARD SURFACE STEAM CLEANER utilizes pressurized steam to remove tough grease,dirt and grime. Steam is nature’s purest and most powerful cleaner Both the angle adapter and the small detail brush can be used on the concentrator for safely cleaning all hard surfaces in your home without harsh chemicals, thus being perfectly nozzle.
- Page 6 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS How To Assemble & Use Attachments CAUTION: Concentrator Nozzle / Steam Always ensure the unit is “UNPLUGGED” from the wall Diffuser receptacle prior to filling or re-filling the water tank. Failure to follow these steps will cause the water tank to overfill. To attach the concentrator nozzle or the steam diffuser to the nozzle, align Step 1: Before filling the steam cleaner, make sure that the unit is NOT plugged in.