Recording; Recording Audio Into A Pyramix Virtual Studio Project - Merging Pyramix Quick Start Manual

All Settings > Project
The All Settings > Project folder has three pages, Information, Record and Controller Mapping. These allow
configuration of settings and information specific to the Project. For now, we will briefly look only at the Record
page.
Use the Record page to define the destination folder, file type, bit depth and format for all Media Files captured or
imported into the Project. This information is required before any capture of audio can be accomplished. Select
the Windows folder for the Media Files using the Media Folder text entry box. The combo box accesses all
mounted Media Folders and the adjacent ... button opens a browser. The default destination will normally be the
\PmxMedia\ folder. Choose the bit depth or word length for captured or imported files from the Resolution
combo box. This will normally be either 16-bit (16 bps) or 24-bit (24 bps). Choose the file format for captured and
imported audio Media Files using the Format combo box. A variety of file formats can be chosen, although the
native PMF file format is most efficient and is especially recommended for projects with a high track count. Finally,
tick the One file per track box to generate a separate monaural Media File for each track recorded or imported
into Pyramix rather than a single interleaved Media File containing all tracks recorded in a single pass.

Recording

Recording Audio into a Pyramix Virtual Studio Project

Start a new Project, or open an existing one. Be certain to set the Mixer sample rate and sync source as desired.
You will need to configure at least the number of Mixer Strip channels as the number of Tracks you wish to record.
Quickstart Guide : Recording
All Settings Project Record page
Page 36