Call Parking; Parking A Call; Handling Park Recalls - Comdial CONVERSip EP100 User Manual

6. Dial extension number of telephone to receive your forwarded
calls.
7. Press SPEAKER to end. Display shows FWD.
To cancel call forwarding, select the right soft key.

4.5 Call Parking

4.5.1 PARKING A CALL

You can place an intercom or outside call on hold in the system so
that it can be answered from any station, even though it may not have
a line appearance for the call. You accomplish this by placing the call
in one of many park orbits, where the call remains until it is
answered.
To park a call using a programmed PARK button, while on the call,
press the programmed PARK button (the system places the call in a
preselected park orbit and lights the PARK light).
To retrieve a call that was placed on hold in the system (parked),
1. Press INTERCOM.
2. Press lit programmed PARK button
4.3.2 DIVERTING ALL INCOMING CALLS TO
ANOTHER STATION

4.5.2 HANDLING PARK RECALLS

Call diverting permits you to send an incoming call to another station
When a parked call times out of the system, it returns to your tele-
that you have previously designated. You can divert an incoming call
phone in the form of a park recall (you hear four short tone bursts at
to the designated station whether you are busy or idle.
12-second intervals).
To identify the station to receive diverted calls,
1. Press INTERCOM.
2. Dial *55.
3. Dial extension number of station to receive diverted call.
To divert calls to the designated station,
Sept '04
CONVERSip EP100 User
Comdial 53