Holding Calls - Comdial CONVERSip EP100 User Manual

2.4 Holding Calls

You can place a call on hold and retrieve it later. With a regular hold,
you can pick up the held call only at your telephone.
To place a call on hold, press HOLD (station button) or select HOLD
(soft key). The light above your HOLD button begins to blink.
To retrieve a held call,
1. Press line button of the held call (with winking green light), or
press TAP.
2. Speak toward telephone or lift handset if privacy is desired.
After a call has been on hold for the period of time (set by the installer
of your system), the system causes four quick hold recall tone bursts
to sound at your telephone, the flash rate of the line button becomes
faster and the light becomes orange.
If a held line is recalling, choose one of
the following.
1. Select HOLD to place the call on
hold at your station and restart
hold timer.
2. Lift handset, press line button
(with flashing orange light) or
select ANS to retrieve the call.
Sept '04
Comdial
CONVERSip EP100 User
31