Table of Contents
Advertisement
Priority Button:
Alternates the control of
temperature selection
between front and remote
controller.
Power Button:
Turns the heater ON or
OFF.
1.
To switch the water heater ON with Remote Controller, from OFF condition Press the Power Button.
□
The temperature selected will be indicated on the LCD Monitor on the remote controller.
2.
When running the water by opening the tap, the water heater will start the burner automatically and the burner
indicator will light up the remote controller. When water taps are closed, the unit will stop the burner and burner
indicator will be off on the remote controller.
3.
To switch the water heater OFF with remote controller, press the power button.
□
The LCD Monitor and the ON indicator should go off on the remote controller.
4.
To adjust the water temperature : Press either the Hotter(up) or Cooler(down) temperature setting button with the
unit ON ( temperature setting is only adjustable when the burner is not in use)
5.
To lock the remote controller : Press the priority button with the unit ON. The priority indicator should light and
now temperature can only be adjusted at the remote control; control cannot be transferred while burner is ON.
!
The maximum water temperature setting can be limited by DIP switches. This manual setting overrides remote
control temperature setting.
How To Use the Remote Controller
Figure 1.
NOTICE
LCD Monitor:
Indicates water temperature and shows
error code in the event of an error.
Temperature Setting Button:
Used to set water temperature.
36
Figure 2.
!
Hide quick links:
Advertisement
Table of Contents
