Page 1
Camera User Guide WCW100 WCW100 The WCW100 is a wireless camera that communicates with the Nexia Home Intelligence system through your existing wireless router. DO NOT connect Ethernet or power before enrolling the camera. For indoor use ONLY! WCW100 Wireless Camera...
Power, Ethernet and MAC ID DO NOT connect power and Ethernet until instructed to do so by the web site, during the enrollment process. WCW100 MAC ID is located on the label on the back of the camera. XXXXXXXXXX XXXXXXXXXX...
Enrolling the Camera Camera enrollment is done using the www.mynexia.com web site. You must have an active account before enrolling the camera. 1. Make sure Ethernet and power are not plugged in to the camera. 2. Log on to your account at www.mynexia.com. 3.
Page 4
The camera is intended to provide visual verification of current or triggered events, which generally are accomplished in 2 minutes or less. Video can be continued for additional 2 minute segments by selecting the PLAY icon. Can a camera be connected to more than one Nexia Home Intelligence account simultaneously? Moving the Camera to a Different Account No.
Page 5
Can I use cameras from other manufacturers? Not at this time. The Nexia Home Intelligence camera is designed to provide a secure video connection, along with easy plug and play installation, not currently available with other cameras. Check nexiahome.com for updates.
Need help?
Do you have a question about the WCW100 and is the answer not in the manual?
Questions and answers