Installation Procedure - Bosch HWD27 Installation Manual

Dimension
Model
27" (685 mm) 30" (762 mm)
A 26 3/4" (679 mm) 29 3/4" (755 mm)
B 11 1/4" (286 mm) 11 1/4" (286 mm)
C 3 5/8" (93 mm) 3 5/8" (93 mm)
D 2 3/16" (55 mm) 2 3/16" (55 mm)
E 2 5/8" (66 mm) 2 3/4" (69 mm)
F 1 5/8" (40 mm) 1 5/8" (40 mm)
G 21 1/2" (547 mm) 24 3/8" (618 mm)
Installation Procedure
_ AUTION:
Before installing, turn power OFF at the service panel. Lock service
panel to prevent power from being turned ON accidentally.
1. Prepare cabinet cutout.
Prepare cabinet cutout and install electrical connection according to the
dimensions in "General Information".
2. Remove drawer.
.
1) Pull drawer to fully open position.
2) Press down right drawer clip.
3) Lift up left drawer clip.
4) Firmly pull the drawer straight out. Retract cabinet rails while drawer is
removed.
Connect power cord.
Insert plug into three-prong, grounded outlet. See "Power Requirements and
Grounding" above for electrical specifications.
English 5