Table of Contents
Advertisement
4.
Remove
top hinge cover.
a. Lift back of hinge cover about 1/4".
b.
Slide hinge cover toward front and off
hinge. See Figure 58.
C. Trace around the outside of hinge with a
pencil. This allows easier aligning when
reassembling.
Figure
58
5. Free top hinge of freezer door.
a. Loosen the three 5/16" hex head screws
with a 5/16" hex nut driver. See Figure 59.
b. Pull hinge
upward
to release
freezer
door.
A
CAUTION: ToAvoid Risk of
Personal Injury or Property Damage have
•(2) two people help remove each door, one
person to hold door while the other removes
strapping tape.
A
CAUTION: ToAvoid
Personal
Injury or Property
Damage:
Do NOT allow door to drop to floor;
to do so could damage door.
Figure
59
C. Save plastic
top hinge plate spacer(s),
if
used, and all unattached
plastic
hinge
spacer
ring(s)
from underneath
top hinge
plate pin and use in Step 21. See Figure
60.
NOTE:
Some refrigerators
may not have
spacer(s).
6.
Remove freezer door.
a.
b.
Remove
tape from freezer
door.
Grasp freezer door securely and lift
upward as you open it. This will free
door from center hinge pin and you
can set it aside.
C. Lay door down on blanket or moving pad.
d.
At no time should door rest on its bottom
edge after removal.
Figure
60
Advertisement
Table of Contents
