Amana TX20QBL-P1111703WL Installation Instructions Manual page 27

b.
Using a Phillips screwdriver, remove
handle screws on top side of each
handle on both doors. See Figure 43.
Figure 43
C. Using a Phillips screwdriver, remove
handle, remove handle screws on
bottom side of each handle on both
doors. See Figure 44.
Figure 44
5. Move nameplate on handle to maintain
upright position.
a.
bo
Using a taped small screwdriver, pry
off cover located behind nameplate.
See Figure 45.
Bend tabs behind nameplate up to
remove nameplate.
C. Rotate nameplate one half turn.
Figure 45