Valor DD-858W User Manual page 36

Pairing
1. Click Pair in screen to have the unit prepare starting pairing.
It will display "Waiting for Pairing" in screen.
2. Enable your cellular phone's bluetooth pairing. If the cellular phone requires
the pin code, enter 1 2 34.
3. It will display "Pair OK " on screen when the paring is completed.
*
In case of failure of pairing
- Delete item in paired list on your Bluetooth cellular phone
- Reset both cellular phone and this unit by switching on/off
- Restart pairing as per previous procedures.
* Should your cellular phone battery be at low charge, the Bluetooth connection
may occasionally be lost. To maintain good connectivity ensure that your
cellular phone battery is adequately charged.
Disconnect
To disconnect Bluetooth link, just click DISCONNECT in screen.
Make a Call
(unavailable if pass-word stored in the cellular phone)
1. Enter phone numbers in Dial Pad in screen or by using remote control.
- +-
in screen means erasing a number just entered.
2. Press Pick Up in screen or
0
button(26) in remote control for calling.
3. Talk through the supplied microphone.
3. Press Hang Up in screen or
e
button(27) in remote control to hang up the
call displaying "Call End" in screen.
Receive a Call
1. When the unit is ringing, "Answer?" appears in screen.
Press Pick Up in screen or
~
button(26) in remote control for calling.
- If ringing in other mode sucK as DVD, Radio, ... this unit automatically change
into Bluetooth mode. After phone talking, it also resume back to the previous
mode after 5 seconds delay time as below image.
- Even though making a call by cellular phone, not by this unit, this unit would
activate automatically, showing "Talking" in screen.
2. Talk through the supplied microphone.
3. After finishing conversation, press Hang Up in screen or
®
button(27) in
remote control to hang up the call displaying "Call End" in screen.
36