Valor DD-858W User Manual page 18

Adjust Sensitibity
1. OX is default as displayed on screen. When selected LOC, the sensitivity will
decrease of 20dB. You can select LOC when operating SEEK near
broadcasting station.
2. Press LOC/OX at downside in dispay to change the sensibility.
Stereo Broadcast (ST)
When ST appears at upside of display, it's stereophonic broadcasting. If not, it's
monophonic broadcasting.
Using Preset Stations
Ten stations are preset and recall stations for each band.
All ten stored stations for the current band appear on the TFT screen .
. Storing Stations
1. Select a band(if needed), then select a station.
2. Press to hold 1-0 buttons in remote control or 1-10 of station list at leftside
in display (Press
T
at leftside of the list, if needed) for 3 seconds to store
each station's frequency to the number.
3. To listen to a corresponding stored station, press 1-0 buttons in remote
control or 1-10 in display.
Auto Store (AS)
Use Auto Store function to select six strong stations and store them automatically
in current band.
1. Select a band (if needed).
2. To activate Auto Store function, press AS/PS at downside in display for 3
seconds. The new stations replace the stations already stored in that band.
Preset Scan (PS)
Scan stored stations in the current band.
1. Select a band (if needed).
2. Press AS/PS in display, the unit pauses for 3 seconds at each preset station.
3. Press AS/PS again to stop scanning when a desired station is found.
18