Connecting The Power Cord - Pioneer AVH-P4200DVD Operation Manual

Connecting the units

Connecting the power cord

Navigation unit can
be connected
(AVIC-U220(sold
separately)).
Please contact your
dealer to inquire about
the connectable
navigation unit.
Yellow
Connect to the constant 12 V supply terminal.
Orange/white
Connect to lighting switch terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Front speaker
Left
Rear speaker or
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not
connect anything to Green and Green/black leads.
6
26 pin cable (Supplied with Navigation unit)
Insert the 26 pin cable in the direction
indicated in the figure.
RGB input
Antenna input
AUX jack (3.5 ø) (AVH-P4200DVD only)
Use a mini plug cable to connect with auxiliary device.
Microphone input (AVH-P3200BT only)
White
White/black
Green
Green/black
Green
Not used.
Green/black
Fuse (10 A)
Gray
Gray/black
Violet
Violet/black
Violet
Violet/black
This product
(AVH-
P4200DVD only)
Fuse resistor
Fuse resistor
Front speaker
Right
Rear speaker or
Subwoofer (4 Ω)
Subwoofer (4 Ω)
× 2