Definitive Technology Mythos One Owner's Manual page 9

them up nonnally to the amplifier receiver) and connect the subwoofer
to the sub-out with a low-level RCA cable (with Definitive sub-
woofers this would input into the left or right channel input). You
would then set the woofer's low-pass crossover. We would suggest
starting around 80 Hz and then experiment up or down from there.
You also have the option with Definitive subwoofers of using the
subwoofer's built-in speaker level high-pass crossover as described
in the subwoofer instruction manuals. In this case, also start with the
subwoofer low-pass crossover at about 80 Hz and experiment.
Use of Mythos One as Rear or Side
Surround Speakers
Mythos loudsPeakers make excellent rear or side surround sPeakers.
In order to use the Mythos sPeakers as rear or side surround sPeakers,
simply hook them up as normal to the rear or side channel amplifier
outputs of your system. Set the bass management system of your decoder
to "Small" rear and/or side surrounds if your system is using a separate
subwoofer, or "Large" rear or side surrounds if your system is not using
a separate subwoofer.