Definitive Technology Mythos One Owner's Manual page 6

Connecting Your Mythos Loudspeakers
Hooking Up Your Mythos Loudspeakers
Your Mythos loudspeakers each have one pair of gold 5-way
binding posts. Nonnally, you will hook up the left main/front channel
red(
+)
tenninal of your receiver or amplifier to the red(
+)
tenninal of
your left Mythos loudspeaker and the left main/front channel black(-)
tenninal of your receiver or amplifier to the black(-) tenninal of your
left Mythos loudspeaker. Connect the right channel main/front chan-
nel red(
+)
tenninal of your amplifier or receiver to the red(
+)
tenninal of your right Mythos loudspeaker and the black(-) tenninal
of the right main/front channel of your receiver or amplifier to the
black(-) terminal of your right Mythos loudspeaker.
If you are using the Mythos as side/rear surround speakers, hook
up the left surround red(
+)
terminal of your receiver or amplifier to
the red(
+)
tenninal of your Mythos left surround speaker and the left
surround black(-) tenninal of your receiver or amplifier to the black(-)
tenninal of your Mythos left surround speaker. Connect the right
surround red(
+)
tenninal of your amplifier or receiver to the red(
+)
tenninal of your Mythos right surround loudspeaker and the black(-)
tenninal of the right surround channel of your receiver or amplifier
to the black(-) terminal of your Mythos right surround loudspeaker.
If your receiver/ decoder has a bass management system and you
are using a separate subwoofer, set bass management to "Small" left
and right main speakers, "Small" center channel, "Small" surround
speakers and "Yes" subwoofer. If your receiver/decoder has a choice
of crossover frequencies, set the crossover to 80 Hz. If you are not
using a separate subwoofer, set bass management to "Large" left
and right main speakers, "Large" center channel and "Large"surround
speakers, and "No" subwoofer.