Operating Modes - Procentec PROFINET User Manual

2 Operating modes

The PROFINET Cable Tester runs in 4-modes. The mode is selected with 4 buttons.
The cable tester is switched ON by pressing any of these buttons and it immediately starts testing in
the mode which is pressed. An LCD icon for the currently selected mode will be blinking.
Press any button except the selected mode button to switch the cable tester OFF.
Telephone
PROFINET and
regular Ethernet
REMOTE UNIT
PN1-Manual-EN.docx
Fig. 1 - Location of the buttons and Remote Unit
_______________________________________________
Version 1.2 – 27 April 2009
PROFINET Cable Tester – User Manual
© PROCENTEC 2009 - Copyright - all rights reserved
Coax
Tone generator
Page 8 / 32