Power Saving Mode - CTX Virtual Technologies VK200 KEYFOB User Manual

9. POWER SAVING MODE

1. Hold down the
to turn off the laser Projection and reduce camera
intake speed. Double beeps will confirm the 3
seconds period is being detected.
2. To reactivate laser projection and return operation
to normal, tap or swipe anywhere in the keyboard
operational area.
If there is no motion detected for 5 minutes the unit
will automatically turn the keyboard display off and
reduce the camera intake speed to save battery. Any
motion in the keyboard area will return the unit to
normal function. Automatic power saving mode will
only occur when the VK200 KEYFOB
under battery power.
To increase the battery life try using a lower
37
and the Alt key for 3 seconds
BATTERY LIFE
brightness setting.
is operating
®