Connecting Via Bluetooth - CTX Virtual Technologies VK200 KEYFOB User Manual

5.3 CONNECTING VIA BLUETOOTH

VK200 KEYFOB
• Connection via Bluetooth HID does not require
installation of separate driver as long as the host
device has HID compatibility.
Bluetooth 2.1 or higher required for connecting to
some devices.
The VK200 KEYFOB
re-connect to the last 3 most recently connected
devices. If no previous device is found then it will
listen for a new connection with any available HID
supports Bluetooth HID:
®
NOTE
will automatically attempt to
®
compatible device.
20