5.2 CONNECTING VIA USB
This device is compatible with all USB HID capable
operating systems. USB HID connection allows plug-
n-play without installing a separate driver.
1. Connect VK200 KEYFOB
supplied USB cable. Host device must support USB
HID. Note: Most Windows devices support USB HID.
2. Turn on VK200 KEYFOB
3. Display Screen of the VK200 will have the U
displayed. If no U is displayed please check the
connection.
Bluetooth has priority over USB. If Bluetooth is
connected and a U is displayed and flashing then
click FN and B or use the menu system to turn
Bluetooth off allowing USB HID to take over.
19
BLUETOOTH PRIORITY OVER USB
and host device using
®
.
®