Picture Mode - Haier HTF20 Owner's Manual

Other Functions
MUTE
Q.VIEW INFO
INPUT TV/DTV
1 2 3
4 5 6
7 8 9
SAP P.MODE
0
-
OK
CH+
VOL VOL
MENU
- +
CH-
CC SLEEP FAV.LIST
CH.LIST
ARC
GUIDE
EXIT
QUICKLY VIEW
This function enables quick swap to the last watched program.
1
Suppose the channel number you used
just now is 8 and the channel number
you are using is 18 (as shown in the figure).
2
If you want to return to the last watched
program channel 8, you can simply press
the Q.View button.
3
If you want to return to channel 18, press
the button again. Use this function, you
can easily change between the channel
you are using and the channel you used
last time.
SLEEP TIMER
To set the TV to turn off after a preset amount of time, press SLEEP
button repeatedly to select
the number of minutes. First the
OFF option appears on the screen,
followed by the following sleep
timer options:
(5 MINUTE,10 MINUTE, 15 MINUTE,
30 MINUTE,45 MINUTE, 60 MINUTE,
90 MINUTE,120 MINUTE,
180 MINUTE, 240MINUTE,OFF)
To confirm the sleep timer setting,
p ress SLEEP and the remaining
time will be displayed for a few
seconds. T o cancel the sleep timer,
Press SLEEP repeatedly until the
display turns to OFF.

PICTURE MODE

Every time press the P.MODE button to
switch desired picture quality mode.
Four kinds of picture modes
(i.e., "MILD","STANDARD","VIVID" ,
"CUSTOM", ) can be selected in turn.
35
SLEEP OFF
MILD