Channel Selection - Haier HTF20 Owner's Manual

MUTE
Q.VIEW INFO
INPUT TV/DTV
1 2 3
4 5 6
7 8 9
SAP P.MODE
0
-
OK
CH+
VOL VOL
MENU
- +
CH-
CC SLEEP FAV.LIST
CH.LIST
ARC
GUIDE
EXIT
You can select the channel by using either CH +/- button
or Channel number buttons. How to select the channel
in each way is shown below.
1
Using CH +/- button
Using CH +/- button on the remote control, change the channel.
Same operation is available with CH +/- button on the front panel
of the main unit.
2
Press the Direct Channel selection buttons to select the channel.
Antenna Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Antenna position, all channels
can be instantly selected by using
2-9: Press 2-9 as needed.
Example, to select channel 2, press "2".
10-69: Press the 2 digits in order. If you select the channel more than 69,
the channel will not be change, it is no available.
CABLE Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Cable position, channels
can be selected as follows:
1-9: Press 1-9 as needed. Example, to select channel 2,
press "2".
10-99: Press the 2 digits in order. Example, to select channel 32,
press "3" then "2".
100-125: Press the digital 1 button, the "1--" will appear
on the screen, then press the 2 digits of remain in order.
TV
VHF
2-13
UHF
14-69
NOTE:
In the DTV broadcasting, one channel sometimes broadcasts
multiple programs depending on the air time. In this case, the
main channel is called major channel and the sub channel is
called minor channel.

Channel selection

digits button. For example:
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
16