Adjust Doors - Jenn-Air JS42SEFXDB Installation Manual

Top Grille Panel
1. Grasp both ends of the top grille.
2. Push straight up, then pull straight out. Place the top grille
panel-side down on a soft working surface.
B A B
3=
4=
A. Top grille
B. Cabinet side trim
Remove one end cap by loosening the nuts and sliding off the
end cap.
A
l/,
D _
A. Bottom rail C. End cap
B. Nuts D. Top rail
Slide the backer panel into the top grille channel and reattach
the end cap.
Door Height Adjustment
Use the following steps to adjust the door height, up or down,
after the doors have been leveled.
1. Open the freezer or refrigerator door. Locate the bottom hinge
and remove the door stop screw.
Euro-Style and Pro-Style ®Styles
Remove the door stop screw from the bottom side of the
hinge with a %" open end wrench.
A B C
A. Bushing
B. Door stop screw
C. Locking plate
Overlay Style
Remove the two door stop screws: one from the bottom side
using a %" open end wrench and one from the top side using
a %2" Allen wrench.
5=
A. Backerpanel
Replace the top grille in the cabinet side trims and pull the
panel down slightly to lock it into place.
B B
A. Top grille
B. Cabinet side trim
i
A B
A. Door stop screw from bottom
B. Doorstop screw from top (110°)
2. Remove the locking plate as shown.
21