Installation Instructions
B2.__. USE TOP CABINET TEMPLATE
FOR PREPARATION
OF TOP
CABINET
You need to drill holes for the top support
screws,
a
hole large enough
for the power cord to fit through,
and a cutout large enough for the exhaust
adaptor.
•
Read the instructions
on the TOP CABINET
TEMPLATE.
•
Tape it underneath
the top cabinet.
•
Drill the holes, following
the instructions
on the
TOP CABINET
TEMPLATE.
CAUTION:
Wear safety goggles
when drilling holes
in the cabinet
bottom.
B3.__. ADAPTING
MICROWAVE
BLOWER
FOR OUTSIDE TOP
EXHAUST
1.
Remove
and save
screw that holds
blower plate to
microwave.
2, Lift up the
blower plate.
B_.ckof
_°'_
Microwave
Screw
3.
Carefully
pull out the blower
unit. The wires will
extend far enough to allow you to adjust the
blower
unit.
"
CAUTION:
Do not touch blade of blower to prevent
cracking
and breaking.
Hold outer case when the
blower is removed
and re-installed.
4, Roll the blower
unit 90 ° so that fan blade
openings
are facing toward the top of the
microwave.
Roll
15